Fluke Multifunction Calibrator Calibration
Nationwide, ISO/IEC 17025 accredited calibration for Fluke multifunction calibrators, performed to Fluke specifications.
Fluke calibrator calibration services—for the instruments that calibrate everything else.
Tescom Calibration Services calibrates Fluke multifunction calibrators, including the 5500 Series and 5700 Series, to the manufacturer's published specifications. Customers across the U.S. ship their calibrators to our ANAB-accredited lab, and local customers can drop off at our Cedar Park or San Antonio locations. Every unit comes back with NIST-traceable results and full as-found and as-left data.
A multifunction calibrator sources DC and AC voltage, current, resistance and more from a single instrument, which makes it the reference standard behind hundreds of downstream calibrations. When it drifts, every meter, scope and process instrument it touches drifts with it. We keep it in tolerance so your own calibrations stay defensible.
ISO 17025 Fluke Multifunction Calibrator Calibration You Can Defend in an Audit
Fluke multifunction calibrators are the workhorse electrical standards in most labs, but they're only as good as their last calibration. Tescom calibrates them to Fluke's published specifications under ISO/IEC 17025 accreditation from the ANAB ANSI National Accreditation Board, so your unit is verified against the specs it was built to, with a certificate auditors accept.
-
To Fluke specifications: every function tested against the published specifications for your model and installed options.
-
ISO/IEC 17025 accredited: calibrations performed within our ANAB scope, with stated measurement uncertainties.
-
NIST traceable: an unbroken chain of comparisons back to national standards.
-
Nationwide service, local labs: customers anywhere in the U.S. ship to our accredited labs.
Fluke Calibrator Service and Recertification: What's Included
Every Fluke calibrator recertification from Tescom includes:
-
Incoming inspection and functional check of the unit and installed options
-
As-found data on every tested point, so you can assess impact on the work your calibrator supported
-
Adjustment to Fluke specifications when a point is out of tolerance or near its limit
-
As-left data confirming the calibrator meets specification before it ships
-
Accredited calibration certificate with measurement uncertainties and NIST traceability
-
Out-of-tolerance notification so your quality team can start any required impact review right away
-
Online certificate access through our customer portal, ready for your next audit
Built for Aerospace, Defense and Other Regulated Industries
Aerospace and defense manufacturers rely on Fluke calibrators to support their in-house metrology labs, and their supplier-quality requirements leave no room for gaps. Tescom delivers the documentation those programs expect: accredited certificates, full as-found and as-left data, stated uncertainties, and prompt out-of-tolerance reporting.
We also support Fluke calibrator users in manufacturing and electronics production, medical device and research labs, electrical utilities and energy, and third-party and in-house calibration labs.
Whether you run one Fluke calibrator or a fleet across sites anywhere in the U.S., we'll build a recall schedule that keeps your references in tolerance and your downtime short.
Getting Your Fluke Calibrator Calibrated Is Simple
Send Us Your Equipment List
Include model, serial number and installed options.
Receive a Quote & Schedule Service
We'll confirm pricing, turnaround and shipping or drop-off.
Get it back calibrated and audit-ready.
Your unit returns with an accredited certificate and online record.
Fluke Multifunction Calibrator Calibration FAQ
-
What is a Fluke multifunction calibrator?
It's a single bench instrument that sources precise DC and AC voltage, current and resistance, and often frequency, thermocouple and oscilloscope signals, to calibrate other test equipment. Common models include the 5522A and the 5700-series.
-
How often should a Fluke multifunction calibrator be calibrated?
Most labs recalibrate annually. Fluke publishes specifications for set intervals, typically 90 days and 1 year, so the right interval depends on the accuracy your work requires. We can help you choose.
-
Is your Fluke calibrator calibration ISO 17025 accredited?
Yes. Tescom's Cedar Park lab is accredited to ISO/IEC 17025 by ANAB. See our Scope of Accreditation for details.
-
Will I get as-found data?
Yes. Every calibration includes as-found and as-left data, so you can assess the impact on calibrations your unit performed.
-
What is your turnaround time?
Our typical turnaround time for Fluke calibrations is 7 business days.
-
Do you serve customers outside Texas?
Yes. We calibrate Fluke multifunction calibrators for customers nationwide. Request a quote to get started.
Request a Quote from Tescom Calibration Services
-
ISO/IEC 17025 accredited calibration laboratory
-
Reliable electronic and physical/dimensional calibration services with fast turnaround times
-
Nationwide mail-in calibration services, on-site in Cedar Park & San Antonio
-
Proudly providing quality calibration services since 1982